Stainless steel I-beams (I-beams) have an I-shaped cross-section with a sloping inner flange and gradually thinning flanges from the root to the edge, unlike the parallel flange structure of H-beams. They are produced using hot rolling as the core process and are made from stainless steel grades such as 201, 202, 304, 316, 316L, and 310S. They are inherently rust-proof, acid and alkali resistant, and salt spray corrosion resistant, requiring no subsequent anti-corrosion coating. They are suitable for long-term use in coastal, chemical, and humid corrosive environments.

H-beam is an economical section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

H-beam is an economical section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

H-beam is an economical section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

06Cr17Ni12Mo2 equals to 316 stainless steel. Molybdenum alloyed for superior resistance to seawater, acid and chloride corrosion. Ideal for marine, chemical and wastewater treatment projects.

00Cr22Ni5Mo3N is austenitic-ferritic duplex steel. Combining high strength of ferritic steel and good toughness of austenitic steel. Outstanding resistance to pitting, stress corrosion and seawater. For heavy-duty anti-corrosion industrial projects.

Duplex stainless steel plate features a unique dual-phase metallographic structure with nearly 50% austenite and 50% ferrite. It combines the high toughness and excellent weldability of austenitic steel with the high strength and stress corrosion resistance of ferritic steel.

1Cr13 is basic martensitic stainless steel. Can be heat treated for proper hardness and wear resistance. Good machinability and basic anti-rust performance. For general mechanical parts, valves and simple tools.

Galvanized Steel Square Bar is a zinc-coated square steel product designed for rust and corrosion resistance. Available in solid and hollow forms, it is widely used in construction, fabrication, fencing, frames, and outdoor structural projects.